Our Product

High-speed stator and rotor construction for batch or continuous production, from model IMM-100 to IMM-3000. This inline mixer cum microniser has an inbuilt mechanical seal, a high sanitary finish and SS 316/316L construction, built to cGMP and FDA norms with documentation. Send an enquiry.

DB tooling and ten stations put this compact rotary tablet press at up to 18,000 tablets an hour, with steady, precise compression. The automatic GMP model forms tablets up to 25 mm in diameter with a 20 mm maximum fill depth, driven by a 2 hp main motor. Request a quote for this single rotary tablet machine.

Up to 60,000 tablets an hour from 35 stations: a double sided rotary tablet press for high-volume production. D tooling, a 7.5 hp main motor, an SS 304 body and PLC HMI control keep this GMP model precise at speed. Request a quote for this high speed tablet press.

Surface dust and edge fines come off at the press outlet with this semi-automatic tablet deduster. Built in stainless steel, model ACE-1 handles up to 2,500 tablets per hour along a 4-to-8 spiral vibrating sieve and connects directly to any type of high-speed tablet press. Send an enquiry for configuration details.

Tablet presses and dedusters throw off fine airborne powder; this dust extractor catches it where it forms. Heavy particles settle in an expansion chamber, fine dust is trapped in a filter bag, and a snap-action shaker drops it into a drawer-type tray. AISI 316 contact parts, cGMP design. Send an enquiry.

DB tooling and ten stations put this compact rotary tablet press at up to 18,000 tablets an hour, with steady, precise compression. The automatic GMP model forms tablets up to 25 mm in diameter with a 20 mm maximum fill depth, driven by a 2 hp main motor. Request a quote for this single rotary tablet machine.

DB tooling and ten stations put this compact rotary tablet press at up to 18,000 tablets an hour, with steady, precise compression. The automatic GMP model forms tablets up to 25 mm in diameter with a 20 mm maximum fill depth, driven by a 2 hp main motor. Request a quote for this single rotary tablet machine.

Hand-operated, 300 holes, six capsule sizes. This manual capsule filling machine has a stainless steel body and a 25 × 12 hole pattern, takes capsules from size 00 to size 5, and needs no control panel — built for herbal and Ayurvedic formulations. Send an enquiry.

Vacuum-assisted filling sits at the centre of this automatic liquid capsule filling machine, limiting air bubbles while anti-drip and anti-foaming mechanisms keep the line clean. It orients, separates, fills and closes capsules at up to 25,000 per hour, and every liquid contact part is SS 316L. Request a quote.

Drying, cooling and agglomeration in one fluidised bed. This automatic fluid bed dryer has SS316 contact parts, electric heating up to 80 °C, a 5 HP blower and top discharge, with PLC and HMI touch-screen control and an inbuilt CIP system available. Request a quote.

Powder, pellets or granules go in; filled capsules come out at up to 50,000 an hour. This stainless steel capsule filling machine runs a 25 × 12 hole pattern, takes sizes 00 to 3, and is operated from its own control panel on a 380 V supply. Made in India. Request a quote.

Upper punch, lower punch, die: tablet tooling made in-house in OHNS or HCHC steel, hard chrome plated to 51–60 HRC. Built to EURO and IPT standards or as special tooling, in any shape including multi-tip and Polo type. Send an enquiry with your tooling specification.

Empty capsules, loaded automatically: this capsule loader machine handles hard gelatin capsules from size 000 to size 5. A 3.0 kW motor on a 3-phase supply drives the mechanism, the mechanics are user-controllable, and the finish resists corrosion. Send an enquiry.

Banding the joint between cap and body is how the ABS-20 seals liquid-filled capsules, closing the gap a liquid would otherwise find. The machine is automatic and built in stainless steel. Request a quote for this capsule band sealing machine.

A 100 kg fluid bed dryer for pharmaceutical drying, model ACE. Heated air rises through the product bed and lifts the particles, so each granule is surrounded by moving drying air. Runs on a 240 V supply. Send an enquiry for this FBD machine.

Spare parts for automatic capsule filling machines: the mechanical, electrical and hydraulic sections that keep a capsule line running. Send your machine details and the section concerned, and request a quote from a capsule filling machine spare parts supplier.

Antec-branded and supplied as model ACE, this digital metal detector is built in stainless steel with a matt finish and runs on a 230 V supply. Send an enquiry with your product and line details to confirm sensitivity, aperture and reject arrangement for this tablet metal detector.

Ace International supplies the parts a tablet press wears through: turrets, compression rollers, ejection cams, cam tracks and force feeders, among others. The range extends to stainless steel multi-mill screens and vibro sifter sieves across a wide spread of hole diameters, mesh counts and sieve sizes. Request a quote.

An octagonal container turning on an A-type frame: the dry blender for lubricating granules and homogenising several batches into one. Models run from 25 kg to 5,000 kg batch size, with AISI 316 contact parts, fixed baffles and a butterfly-valve discharge. Request a quote.

Size reduction on this stainless steel multi mill covers granulating, chopping, shredding and pulverising, with adjustable screens and blades and variable speed control setting particle size from coarse to fine for pharmaceutical granules and powders. Rust proof, 230 V. Send an enquiry.

Liquid orals at 50 L or at 10,000 L run on the same automatic process plant design, built in SS 304, 316 or 316L. Top-mounted stirrer or homogenizer, electric heating on smaller capacities, a fully automatic PLC-based version, and cGMP documentation supplied. Request a quote.

Sieving and grading at 200 kg per hour, driven by gyratory vibration from a special vibro motor. This vibro sifter has AISI 316 contact parts, a side outlet with fines discharge, lead-free silicone-sealed sieves and noiseless operation. Semi-automatic, 230 V. Request a quote.

Five plate diameters, from 8 to 33 inches, and a choice of centrifugal, gear or lobe pump: this zero hold up filter press is built in SS 304 or 316L, fitted with pressure gauge, safety valve and air vent, and supplied with cGMP documentation. Send an enquiry.

Hopper or pressure Nutsche — the configuration is your choice, in models from 50 L to 500 L and in SS 304 or 316L. Pressure gauge, safety valve and air vent are fitted, and every unit comes with cGMP documentation. Request a quote.

Drying, cooling and agglomeration in one fluidised bed. This automatic fluid bed dryer has SS316 contact parts, electric heating up to 80 °C, a 5 HP blower and top discharge, with PLC and HMI touch-screen control and an inbuilt CIP system available. Request a quote.

An octagonal container turning on an A-type frame: the dry blender for lubricating granules and homogenising several batches into one. Models run from 25 kg to 5,000 kg batch size, with AISI 316 contact parts, fixed baffles and a butterfly-valve discharge. Request a quote.

Size reduction on this stainless steel multi mill covers granulating, chopping, shredding and pulverising, with adjustable screens and blades and variable speed control setting particle size from coarse to fine for pharmaceutical granules and powders. Rust proof, 230 V. Send an enquiry.

Sieving and grading at 200 kg per hour, driven by gyratory vibration from a special vibro motor. This vibro sifter has AISI 316 contact parts, a side outlet with fines discharge, lead-free silicone-sealed sieves and noiseless operation. Semi-automatic, 230 V. Request a quote.

Direct heater, strip heater or steam jacket/coil: this D.W. storage tank takes the heating method your site needs, from 100 L to 10,000 L, with digital temperature control, a circulation pump and an automatic level controller, in SS 304, 316 or 316L. Request a quote.

Mirror-polished SS 316/316L holds membranes in two sizes, 142 mm and 293 mm. A bubble test arrangement can be provided for checking membrane integrity in the holder. Send an enquiry for this membrane filter holder.

SS 316 throughout, automatic in operation, and rated at 2,500 tablets per hour. This tablet deduster moves tablets along a path of 4 to 8 spirals, runs on a 3-phase, 220 V supply, and is specified for pharmaceutical tablet lines. Send an enquiry for details.

Sterility testing in one, three or six stations. The three- and six-station units come with an SS stand and piping, and every unit is built in SS 316/316L with a mirror polish. Request a quote for this sterility test unit.

Several cartridges in one shell, for more filtration area than a single cartridge gives. This multi cartridge filter housing takes cartridges from 5 inch to 40 inch, is built in SS 304, 316 or 316L, and is Code 7. Request a quote.

Jacketed, SS316 and mirror-finished, this 10,000 L mixing vessel is built for ointment production with electrical heating and a homogenizer agitator. It has a removable top cover and a 10–15 bar maximum design pressure, and is leg mounted to customised design. Request a quote for this ointment manufacturing vessel.

Sized from 5 inch to 40 inch, this single cartridge filter housing holds one cartridge in SS 304, 316 or 316L, Code 7. The same family is also built in a multi-cartridge configuration. Send an enquiry for this single cartridge filter housing.

Jems roller cleaner is a cleaning aid for the sealing rollers of blister packing and strip packing machines. Send an enquiry for product details and availability of this blister machine roller cleaner.

Lifting and tilting a granulation bowl without letting dust escape: this device handles 50 kg to 500 kg in a totally closed operation, connects to a granulator for continuous discharge, and clamps easily to a fluid bed dryer bowl. SS 304, 316 or 316L. Send an enquiry.

From sugar syrup to finished oral liquid with minimum manual handling. This syrup manufacturing plant links a sugar syrup vessel, prefilter, manufacturing vessel and storage vessel through vacuum transfer and product piping, in capacities from 250 L to 25,000 L. Send an enquiry.

Comprehensive or non-comprehensive annual maintenance contracts for pharmaceutical machinery in Mumbai, built around a monthly preventive-maintenance visit. Standby support covers parts sent for repair, and plants running more than fifty machines receive a resident engineer. Request a quote for a standard or custom AMC.

Large tablets need a press built for them. This bolus tablet press compresses tablets up to 32 mm in diameter on 12 stations of D tooling with a 65 mm punch diameter, reaching up to 18,000 tablets per hour from a 7.5 hp main motor. Request a quote.

Mixing and granulating share one bowl in this high shear mixer granulator, where a four-arm impeller and a lump-cutting chopper work automatically. Every product contact part is AISI 316, under a cGMP-compliant design. Send an enquiry for this rapid mixer granulator.